Since rubber, nylon and polytetrafluoroethylene are usually used as valve seat sealing ring materials for ball valves, their service temperature is limited by valve seat sealing ring materials. The cut-off function of the ball valve is completed by the mutual compression between the metal ball and the plastic valve seat under the action of the medium (floating ball valve). Under the action of a certain contact pressure, the seat sealing ring has elastic-plastic deformation in some areas. This deformation can compensate the manufacturing precision and surface roughness of the ball and ensure the sealing performance of the ball valve.
Because the valve seat seal ring of the ball valve is usually made of plastic, the fire resistance and fire prevention of the ball valve should be considered in the selection of the structure and performance of the ball valve, especially in the petroleum, chemical, metallurgical and other departments, and in the use of ball valves in equipment and pipeline systems with flammable and explosive media, more attention should be paid to fire resistance and fire prevention.
In general, ball valves are recommended for pipeline systems with dual position adjustment, strict sealing performance, mud, wear, necking channel, rapid opening and closing (1/4 turn opening and closing), high pressure cutoff (large differential pressure), low noise, cavitation and gasification, small leakage to the atmosphere, small operating torque and small fluid resistance.
The ball valve is also applicable to the pipeline system with light structure, low pressure cutoff (small differential pressure) and corrosive medium. Ball valves can also be used in low-temperature (cryogenic) devices and pipeline systems. In the oxygen pipeline system of metallurgical industry, the ball valve with strict degreasing treatment shall be used. When the main pipelines in oil and gas pipelines need to be buried underground, full bore welded ball valves shall be used. When the adjustment performance is required, the special structure ball valve with V-shaped opening shall be selected. In petroleum, petrochemical, chemical, electric power and urban construction, metal to metal sealed ball valves can be selected for pipeline systems with operating temperatures above 200 degrees.



