1. The thrust bearing reduces the friction torque of the valve stem, which can make the valve stem operate stably and flexibly for a long time.
2. Anti static function: spring is set between the ball, valve rod and valve body, which can lead out the static electricity generated during the switching process.
3. Due to the good self-lubricating property of PTFE and other materials, the friction loss with the ball is small, so the service life of the pneumatic ball valve is long.
4. Low fluid resistance: pneumatic ball valve is the one with the lowest fluid resistance among all valve categories. Even the reduced diameter pneumatic ball valve has relatively low fluid resistance.
5. Reliable valve stem sealing: because the valve stem only rotates without lifting, the packing seal of the valve stem is not easy to be damaged, and the sealing capacity increases with the increase of medium pressure.
6. Good sealing performance of valve seat: the sealing ring made of elastic materials such as polytetrafluoroethylene is easy to seal, and the sealing capacity of pneumatic ball valve increases with the increase of medium pressure.
7. The fluid resistance is small, and the full bore ball valve basically has no flow resistance.
8. Simple structure, small volume and light weight.
9. Tight and reliable. It has two sealing surfaces, and the sealing surface materials of the ball valve are widely used in various plastics, with good sealing performance and complete sealing. It has also been widely used in vacuum systems.
10. It is easy to operate and can be opened and closed quickly. Only 90 ° rotation is required from full opening to full closing, which is convenient for remote control.
11. It is easy to maintain, the ball valve is simple in structure, the sealing ring is generally movable, and it is convenient to remove and replace.
12. When the valve is fully opened or closed, the sealing surfaces of the ball and valve seat are isolated from the medium. When the medium passes through, it will not cause erosion of the valve sealing surface.
13. It is applicable to a wide range of applications, ranging from a few millimeters to several meters in diameter, from high vacuum to high pressure.
14. The ball valve can be used in medium with suspended solid particles due to its wiping property during opening and closing.
15. The processing precision is high, the cost is expensive, and it is not suitable for use in high temperature. If there are impurities in the pipeline, it is easy to be blocked by impurities, resulting in that the valve cannot be opened.




